library

Prolog files

aggregate.pl  -- Aggregation operators on backtrackable predicates
ansi_term.pl  -- Print decorated text to ANSI consoles
apply.pl
convlist/3	Similar to maplist/3, but elements for which call(Goal, ElemIn, _) fails are omitted from ListOut.
exclude/3	Filter elements for which Goal fails.
foldl/4	Fold an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("fold-left"), using columns of m list elements as arguments for Goal.
foldl/5	Fold an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("fold-left"), using columns of m list elements as arguments for Goal.
foldl/6	Fold an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("fold-left"), using columns of m list elements as arguments for Goal.
foldl/7	Fold an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("fold-left"), using columns of m list elements as arguments for Goal.
include/3	Filter elements for which Goal succeeds.
maplist/2	True if Goal is successfully applied on all matching elements of the list.
maplist/3	True if Goal is successfully applied on all matching elements of the list.
maplist/4	True if Goal is successfully applied on all matching elements of the list.
maplist/5	True if Goal is successfully applied on all matching elements of the list.
partition/4	Filter elements of List according to Pred.
partition/5	Filter List according to Pred in three sets.
scanl/4	Scan an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("scan-left"), using columns of m list elements as arguments for Goal.
scanl/5	Scan an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("scan-left"), using columns of m list elements as arguments for Goal.
scanl/6	Scan an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("scan-left"), using columns of m list elements as arguments for Goal.
scanl/7	Scan an ensemble of m (0 <= m <= 4) lists of length n head-to-tail ("scan-left"), using columns of m list elements as arguments for Goal.
apply_macros.pl  -- Goal expansion rules to avoid meta-calling
apply_macros_sentinel/0	Used to detect that library(apply_macros) is loaded into the current context explicitly.
expand_phrase/2	Provide goal-expansion for PhraseGoal.
expand_phrase/4	Provide goal-expansion for PhraseGoal.
arithmetic.pl  -- Extensible arithmetic
assoc.pl  -- Binary associations
atom.pl  -- Operations on atoms
backcomp.pl  -- Backward compatibility
$apropos_match/2	True if Needle is a sub atom of Haystack.
$arch/2
$argv/1
$declare_module/3	Used in triple20 particle library.
$home/1
$module/2
$set_prompt/1	Set the prompt for the toplevel.
$sig_atomic/1	Execute Goal without processing signals.
$strip_module/3	This used to be an internal predicate.
$version/1
C/3	Used to be generated by DCG.
at_initialization/1	Register goal only to be run if a saved state is restored.
call_cleanup/3	Call Cleanup with an indication of the reason unified to Catcher.
checklist/2
concat/3
concat_atom/2	Concatenate a list of atomic values to an atom.
concat_atom/3	Concatenate a list of atomic values to an atom, inserting Separator between each consecutive elements.
convert_time/2	Convert a time-stamp as obtained though get_time/1 into a textual representation using the C-library function ctime().
convert_time/8	Convert a time stamp, provided by get_time/1, time_file/2, etc.
current_module/2	True if Module is a module loaded from File.
current_mutex/3
current_thread/2
displayq/1	Write term ignoring operators and quote atoms.
displayq/2	Write term ignoring operators and quote atoms.
eval_license/0
export_list/2	Module exports the predicates of List.
feature/2	Control Prolog flags.
flush/0
free_variables/2	Return a list of unbound variables in Term.
hash/1	Demands PredInd to be indexed using a hash-table.
hash_term/2	If Term is ground, Hash is unified to an integer representing a hash for Term.
index/1	Prepare the predicate indicated by Head for multi-argument indexing.
lock_predicate/2
merge/3	Merge the ordered sets List1 and List2 into a new ordered list.
merge_set/3	Merge the ordered sets Set1 and Set2 into a new ordered set without duplicates.
message_queue_size/2	True if Queue holds Size terms.
proper_list/1	Old SWI-Prolog predicate to check for a list that really ends in a [].
read_clause/1
read_clause/2
read_history/6
read_pending_input/3
read_variables/2
read_variables/3
set_base_module/1	Set the default module from which we inherit.
set_feature/2	Control Prolog flags.
setup_and_call_cleanup/3	Call Cleanup once after Goal is finished.
setup_and_call_cleanup/4	Call Cleanup once after Goal is finished, with Catcher unified to the reason.
sformat/2
sformat/3
string_to_atom/2	Bi-directional conversion between string and atom.
string_to_list/2	Bi-directional conversion between a string and a list of character codes.
sublist/3	Succeeds if List2 unifies with a list holding those terms for which call(Goal, Elem) succeeds.
substring/4	Predecessor of sub_string using 1-based Offset.
sumlist/2	True when Sum is the list of all numbers in List.
thread_at_exit/1	Register Goal to be called when the calling thread exits.
trie_insert_new/3
unlock_predicate/2
write_ln/1
base32.pl  -- Base32 encoding and decoding
base32/2	Translates between plaintext and base32 encoded atom or string.
base32/3	Encode/decode list of character codes using base32.
base64.pl
base64/2	Equivalent to base64_encoded/3 using the options as(atom) and encoding(iso_latin_1).
base64/3	Encode/decode list of character codes using base64.
base64_encoded/3	General the base64 encoding and decoding.
base64_encoded/4
base64url/2	Translates between plaintext and base64url encoded atom or string.
base64url/3	Encode/decode list of character codes using Base64URL.
broadcast.pl
broadcast/1	Broadcast given event.
broadcast_request/1	Broadcast given event till accepted.
listen/2	Open a channel for listening for events of the given `Templ'.
listen/3	Open a channel for listening for events of the given `Templ'.
listening/3	returns currently open channels.
unlisten/1	Destroy a channel.
unlisten/2	Destroy a channel.
unlisten/3	Destroy a channel.
charsio.pl  -- I/O on Lists of Character Codes
atom_to_chars/2	Convert Atom into a list of character codes.
atom_to_chars/3	Convert Atom into a difference list of character codes.
format_to_chars/3	Use format/2 to write to a list of character codes.
format_to_chars/4	Use format/2 to write to a difference list of character codes.
number_to_chars/2	Convert Atom into a list of character codes.
number_to_chars/3	Convert Number into a difference list of character codes.
open_chars_stream/2	Open Codes as an input stream.
read_from_chars/2	Read Codes into Term.
read_term_from_chars/3	Read Codes into Term.
with_output_to_chars/2	Run Goal as with once/1.
with_output_to_chars/3	Run Goal as with once/1.
with_output_to_chars/4	Same as with_output_to_chars/3 using an explicit stream.
write_to_chars/2	Write a term to a code list.
write_to_chars/3	Write a term to a code list.
check.pl  -- Consistency checking
check/0	Run all consistency checks defined by checker/2.
checker/2	Register code validation routines.
list_autoload/0	Report predicates that may be auto-loaded.
list_cross_module_calls/0	List calls from one module to another using Module:Goal where the callee is not defined exported, public or multifile, i.e., where the callee should be considered private.
list_format_errors/0	List argument errors for format/2,3.
list_format_errors/1	List argument errors for format/2,3.
list_rationals/0	List rational numbers that appear in clauses.
list_rationals/1	List rational numbers that appear in clauses.
list_redefined/0	Lists predicates that are defined in the global module user as well as in a normal module; that is, predicates for which the local definition overrules the global default definition.
list_strings/0	List strings that appear in clauses.
list_strings/1	List strings that appear in clauses.
list_trivial_fails/0	List goals that trivially fail because there is no matching clause.
list_trivial_fails/1	List goals that trivially fail because there is no matching clause.
list_undefined/0	Report undefined predicates.
list_undefined/1	Report undefined predicates.
list_void_declarations/0	List predicates that have declared attributes, but no clauses.
string_predicate/1	Multifile hook to disable list_strings/0 on the given predicate.
trivial_fail_goal/1	Multifile hook that tells list_trivial_fails/0 to accept Goal as valid.
valid_string_goal/1	Multifile hook that qualifies Goal as valid for list_strings/0.
check_installation.pl  -- Check installation issues and features
check_config_files/0	Examines the locations of config files.
check_installation/0	Check features of the installed system.
check_installation/1	As check_installation/0, but additionally returns a list of Component-Problem pairs.
test_installation/0	Run regression tests in the installed system.
test_installation/1	Run regression tests in the installed system.
update_config_files/0	Move config files from their old location to the new if the file or directory exists in the old location but not in the new.
codesio.pl
format_to_codes/3	Use format/2 to write to a list of character codes.
format_to_codes/4	Use format/2 to write to a difference list of character codes.
open_codes_stream/2	Open Codes as an input stream.
read_from_codes/2	Read Codes into Term.
read_term_from_codes/3	Read Codes into Term.
with_output_to_codes/2	Run Goal with as once/1.
with_output_to_codes/3	Run Goal with as once/1.
with_output_to_codes/4	As with_output_to_codes/3, but Stream is unified with the temporary stream.
write_term_to_codes/3	True when Codes is a string that matches the output of write_term/3 using Options.
write_term_to_codes/4	True when Codes\Tail is a difference list containing the character codes that matches the output of write_term/3 using Options.
write_to_codes/2	Codes is a list of character codes produced by write/1 on Term.
write_to_codes/3	Codes is a difference-list of character codes produced by write/1 on Term.
coinduction.pl  -- Co-Logic Programming
coinductive/1	The declaration :- coinductive name/arity, ... defines predicates as coinductive.
console_input.pl
complete_input/4	Compute auto completions for the input line BeforeCursor+AfterCursor.
csv.pl  -- Process CSV (Comma-Separated Values) data
csv/3	Prolog DCG to `read/write' CSV data.
csv/4	Prolog DCG to `read/write' CSV data.
csv_options/2	Compiled is the compiled representation of the CSV processing options as they may be passed into csv//2, etc.
csv_read_file/2	Read a CSV file into a list of rows.
csv_read_file/3	Read a CSV file into a list of rows.
csv_read_file_row/3	True when Row is a row in File.
csv_read_row/3	Read the next CSV record from Stream and unify the result with Row.
csv_read_stream/3	Read CSV data from Stream.
csv_write_file/2	Write a list of Prolog terms to a CSV file.
csv_write_file/3	Write a list of Prolog terms to a CSV file.
csv_write_stream/3	Write the rows in Data to Stream.
ctypes.pl  -- Character code classification
is_digit/3	Succeeds if `C' is a digit using `Base' as base and `Weight' represents its value.
is_paren/2	True if Open is the open-parenthesis of Close.
to_lower/2	Downcase a character code.
to_upper/2	Upcase a character code.
upper_lower/2	True when U is the character code of an uppercase character and L is the character code of the corresponding lowercase character.
date.pl  -- Process dates and times
date_time_value/3	Extract values from a date-time structure.
day_of_the_week/2	Computes the day of the week for a given date.
day_of_the_year/2	Computes the day of the year for a given date.
parse_time/2	Stamp is a timestamp created from parsing Text using the representation Format.
parse_time/3	Stamp is a timestamp created from parsing Text using the representation Format.
debug.pl
assertion_failed/2	This hook is called if the Goal of assertion/1 fails.
debug_print_hook/3	Hook called by debug/3.
assertion/1	Acts similar to C assert() macro.
debug/1	Add/remove a topic from being printed.
debug/3	Format a message if debug topic is enabled.
debug_message_context/1	Specify additional context for debug messages.
debugging/1	Examine debug topics.
debugging/2	Examine debug topics.
list_debug_topics/0	List currently known topics for debug/3 and their setting.
list_debug_topics/1	List currently known topics for debug/3 and their setting.
nodebug/1	Add/remove a topic from being printed.
dialect.pl  -- Support multiple Prolog dialects
dicts.pl  -- Dict utilities
dict_fill/4	Implementation for the dicts_to_same_keys/3 OnEmpty closure that fills new cells with a copy of ValueIn.
dict_keys/2	True when Keys is an ordered set of the keys appearing in Dict.
dict_size/2	True when KeyCount is the number of keys in Dict.
dicts_join/3	Join dicts in Dicts that have the same value for Key, provided they do not have conflicting values on other keys.
dicts_join/4	Join two lists of dicts (Dicts1 and Dicts2) on Key.
dicts_same_keys/2	True if List is a list of dicts that all have the same keys and Keys is an ordered set of these keys.
dicts_same_tag/2	True when List is a list of dicts that all have the tag Tag.
dicts_slice/3	DictsOut is a list of Dicts only containing values for Keys.
dicts_to_compounds/4	True when Dicts and Compounds are lists of the same length and each element of Compounds is a compound term whose arguments represent the values associated with the corresponding keys in Keys.
dicts_to_same_keys/3	DictsOut is a copy of DictsIn, where each dict contains all keys appearing in all dicts of DictsIn.
mapdict/2	True when all dicts have the same set of keys and call(Goal, Key, V1, ...) is true for all keys in the dicts.
mapdict/3	True when all dicts have the same set of keys and call(Goal, Key, V1, ...) is true for all keys in the dicts.
mapdict/4	True when all dicts have the same set of keys and call(Goal, Key, V1, ...) is true for all keys in the dicts.
dif.pl  -- The dif/2 constraint
dif/2	Constraint that expresses that Term1 and Term2 never become identical (==/2).
edinburgh.pl  -- Some traditional Edinburgh predicates
debug/0	Switch on/off debug mode.
display/1	Write a term, ignoring operators and special syntax constructs such as brace terms ({a}) and lists ([a,b,c]).
display/2	Write a term, ignoring operators and special syntax constructs such as brace terms ({a}) and lists ([a,b,c]).
fileerrors/2	Query and change the fileerrors flag.
nodebug/0	Switch on/off debug mode.
reconsult/1	Load source file(s), wiping the old content first.
unknown/2	Edinburgh Prolog predicate for dealing dealing with undefined procedures.
edit.pl  -- Editor interface
edit/0	Edit associated or script file.
edit/1	Edit indicated object.
edit_command/2	This predicate should specify the shell-command called to invoke the user's editor.
locate/2	Locate object from the specified location.
locate/3
select_location/3
error.pl  -- Error generating support
exceptions.pl  -- Exception classification
catch/4	As catch/3, only catching exceptions for which exception(ErrorType,Ball) is true.
error_term/2	Describe the formal part of error(Formal,ImplDefined) exceptions.
exception/2	If Ball is unbound, adds a delayed goal that tests the error belongs to Type when Ball is instantiated (by catch/3).
exception_term/2	Describe exceptions that are not error(Formal, _) terms.
exception_type/2	Declare all exceptions subsumed by Term to be an exception of Type.
explain.pl  -- Describe Prolog Terms
explain/1	Give an explanation on Term.
explain/2	True when Explanation is an explanation of Term.
fastrw.pl  -- Fast reading and writing of terms
fast_read/1	The next term is read from current standard input and is unified with Term.
fast_write/1	Output Term in a way that fast_read/1 and fast_read/2 will be able to read it back.
fast_write_to_string/3	Perform a fast-write to the difference-slist String\Tail.
files.pl
can_open_file/2	Succeeds if the user has access to `File' in mode `Mode'.
chdir/1	Change Working Directory.
gensym.pl  -- Generate unique symbols
git.pl
git/2	Run a GIT command.
git_branches/2	True when Branches is the list of branches in the repository.
git_default_branch/2	True when BranchName is the current branch of a repository.
git_default_branch/2	True when BranchName is the default branch of a repository.
git_describe/2	Describe the running version based on GIT tags and hashes.
git_hash/2	Return the hash of the indicated object.
git_ls_remote/3	Execute git ls-remote against the remote repository to fetch references from the remote.
git_ls_tree/2	True when Entries is a list of entries in the the GIT repository, Each entry is a term:.
git_open_file/4	Open the file File in the given bare GIT repository on the given branch (treeisch).
git_process_output/3	Run a git-command and process the output with OnOutput, which is called as call(OnOutput, Stream).
git_remote_branches/2	Exploit git_ls_remote/3 to fetch the branches from a remote repository without downloading it.
git_remote_url/3	URL is the remote (fetch) URL for the given Remote.
git_shortlog/3	Fetch information like the GitWeb change overview.
git_show/4	Fetch info from a GIT commit.
git_tags/2	True when Tags is a list of git tags defined on the repository.
git_tags_on_branch/3	Tags is a list of tags in Branch on the GIT repository Dir, most recent tag first.
is_git_directory/1	True if Directory is a git directory (Either checked out or bare).
is_git_hash/1	True when Atom represents a GIT hash, i.e., a 40 digit hexadecimal string.
hashtable.pl  -- Hash tables
ht_del/3	Delete Key-Value from HT.
ht_gen/3	True when Key-Value is in HT.
ht_get/3	True when Key is in HT and associated with Value.
ht_is_hashtable/1	True when HT is a hash table.
ht_keys/2	True when Keys is an ordered set of all keys in HT.
ht_new/1	Create a new hash table.
ht_pairs/2	True when Pairs and HT represent the same association.
ht_put/3	Add a Key-Value to HT.
ht_put/5	Add Key-Value to HT.
ht_put_new/3	As ht_put/3, but fails if Key is already in HT instead of updating the associated value.
ht_size/2	True when Size is the number of key-value pairs in HT.
ht_update/4	True when HT holds Key-Old before and Key-New after this call.
heaps.pl  -- heaps/priority queues
add_to_heap/4	Adds Key with priority Priority to Heap0, constructing a new heap in Heap.
delete_from_heap/4	Deletes Key from Heap0, leaving its priority in Priority and the resulting data structure in Heap.
empty_heap/1	True if Heap is an empty heap.
get_from_heap/4	Retrieves the minimum-priority pair Priority-Key from Heap0.
heap_size/2	Determines the number of elements in Heap.
heap_to_list/2	Constructs a list List of Priority-Element terms, ordered by (ascending) priority.
is_heap/1	Returns true if X is a heap.
list_to_heap/2	If List is a list of Priority-Element terms, constructs a heap out of List.
merge_heaps/3	Merge the two heaps Heap0 and Heap1 in Heap.
min_of_heap/3	Unifies Key with the minimum-priority element of Heap and Priority with its priority value.
min_of_heap/5	Gets the two minimum-priority elements from Heap.
singleton_heap/3	True if Heap is a heap with the single element Priority-Key.
help.pl  -- Text based manual
apropos/1	Print objects from the manual whose name or summary match with Query.
help/0	Show help for What.
help/1	Show help for What.
show_html_hook/1	Hook called to display the extracted HTML document.
hotfix.pl  -- Load hotfixes into executables
load_hotfixes/1	Load all hotfixes that have not yet been applied into the current state.
increval.pl  -- Incremental dynamic predicate modification
incr_directly_depends/2	True if Goal1 depends on Goal2 in the IDG.
incr_invalid_subgoals/1	List is a sorted list (set) of the incremental subgoals that are currently invalid.
incr_invalidate_call/1	This is the XSB name, but the manual says incr_invalidate_calls/1 and the comment with the code suggests this is misnamed.
incr_invalidate_calls/1	Invalidate all tables for subgoals of Goal as well as tables that are affected by these.
incr_is_invalid/1	True when Subgoal's table is marked as invalid.
incr_propagate_calls/1	Activate the monotonic answer propagation similarly to when a new fact is asserted for a monotonic dynamic predicate.
incr_table_update/0	Updated all invalid tables.
incr_trans_depends/2	True for each pair in the transitive closure of incr_directly_depends(G1, G2).
is_incremental_subgoal/1	This predicate non-deterministically unifies Subgoal with incrementally tabled subgoals that are currently table entries.
intercept.pl  -- Intercept and signal interface
intercept/3	Run Goal as call/1.
intercept/4	Similar to intercept/3, but the copy of Handler is called as call(Copy,Arg), which allows passing large context arguments or arguments subject to unification or destructive assignment.
intercept_all/4	True when List contains all instances of Template that have been sent using send_signal/1 where the argument unifies with Ball.
nb_intercept_all/4	As intercept_all/4, but backtracing inside Goal does not reset List.
send_signal/1	If this predicate is called from a sub-goal of intercept/3, execute the associated Handler of the intercept/3 environment.
send_silent_signal/1	As send_signal/1, but succeed silently if there is no matching intercept environment.
iostream.pl  -- Utilities to deal with streams
close_any/1	Execute the Close closure returned by open_any/5.
open_any/5	Establish a stream from Specification that should be closed using Close, which can either be called or passed to close_any/1.
lazy_lists.pl  -- Lazy list handling
lazy_engine_next/4	Lazy list iterator for engines.
lazy_findall/3	True when List is a lazy list containing the instantiations for Template for each answer of Goal.
lazy_findall/4	True when List is a lazy list containing the instantiations for Template for each answer of Goal.
lazy_get_codes/4	Lazy list iterator to get character codes from a stream.
lazy_list/2	Create a lazy list from a callback.
lazy_list/3	Create a lazy list where the next element is defined by.
lazy_list_iterator/4	Directive to create a lazy list iterator from a predicate that gets a single next value.
lazy_list_length/2	True if Len is the length of the materialized lazy list.
lazy_list_materialize/1	Materialize the lazy list.
lazy_message_queue/4	Lazy list iterator for message queues.
lazy_read_lines/4	Lazy list iterator to read lines from Stream.
lazy_read_terms/4	Turn a stream into a lazy list of Prolog terms.
listing.pl  -- List programs and pretty print clauses
listing/0	Lists all predicates defined in the calling module.
listing/1	List matching clauses.
listing/2	List matching clauses.
portray_clause/1	Portray `Clause' on the current output stream.
portray_clause/2	Portray `Clause' on the current output stream.
portray_clause/3	Portray `Clause' on the current output stream.
lists.pl  -- List Manipulation
macros.pl  -- Macro expansion
expand_macros/5	Perform macro expansion on TermIn with layout PosIn to produce TermOut with layout PosOut.
include_macros/3	Include macros from another module.
macro_position/1	True when Position is the position of the macro.
main.pl
argv_options/3	Parse command line arguments.
argv_options/4	As argv_options/3 in guided mode, Currently this version allows parsing argument options throwing an exception rather than calling halt/1 by passing an empty list to ParseOptions.
argv_usage/1	Use print_message/2 to print a usage message at Level.
cli_debug_opt_help/2	Implements opt_type/3, opt_help/2 and opt_meta/2 for debug arguments.
cli_debug_opt_meta/2	Implements opt_type/3, opt_help/2 and opt_meta/2 for debug arguments.
cli_debug_opt_type/3	Implements opt_type/3, opt_help/2 and opt_meta/2 for debug arguments.
cli_enable_development_system/0	Re-enable the development environment.
cli_parse_debug_options/2	Parse certain commandline options for debugging and development purposes.
main/0	Call main/1 using the passed command-line arguments.
make.pl  -- Reload modified source files
modules.pl
current_temporary_module/1	True when we are executing in the given temporary module context.
in_temporary_module/3	Run Goal on temporary loaded sources and discard the module and loaded predicates after completion.
nb_rbtrees.pl  -- Non-backtrackable operations on red black trees
nb_rb_get_node/3	True if Node is the node in RBTree associated to Key.
nb_rb_insert/3	Add Key-Value to the tree RBTree using non-backtrackable destructive assignment.
nb_rb_node_value/2	Value is the value associated to Node.
nb_rb_set_node_value/2	Associate Value with Node.
nb_set.pl  -- Non-backtrackable sets
obfuscate.pl  -- Code obfuscating
occurs.pl
contains_term/2	Succeeds if Sub is contained in Term (=, deterministically).
contains_var/2	Succeeds if Sub is contained in Term (==, deterministically).
free_of_term/2	Succeeds of Sub does not unify to any subterm of Term.
free_of_var/2	Succeeds of Sub is not equal (==) to any subterm of Term.
occurrences_of_term/3	Count the number of SubTerms in Term that unify with SubTerm.
occurrences_of_var/3	Count the number of SubTerms in Term that are equal to SubTerm.
sub_term/2	Generates (on backtracking) all subterms of Term.
sub_term_shared_variables/3	If Sub is a sub term of Term, Vars is bound to the list of variables in Sub that also appear outside Sub in Term.
sub_var/2	Generates (on backtracking) all subterms (==) of Term.
operators.pl
pop_operators/0	Revert all changes to the operator table realised since the last push_operators/1.
pop_operators/1	Reset operators as pushed by push_operators/2.
push_op/3	As op/3, but this call must appear between push_operators/1 and pop_operators/0.
push_operators/1	Installs the operators from New, where New is a list of op(Prec, Type, :Name).
push_operators/2	Installs the operators from New, where New is a list of op(Prec, Type, :Name).
option.pl  -- Option list processing
optparse.pl  -- command line parsing
opt_arguments/3	Extract commandline options according to a specification.
opt_help/2	True when Help is a help string synthesized from OptsSpec.
opt_parse/4	Equivalent to opt_parse(OptsSpec, ApplArgs, Opts, PositionalArgs, []).
opt_parse/5	Parse the arguments Args (as list of atoms) according to OptsSpec.
parse_type/3	Hook to parse option text Codes to an object of type Type.
ordsets.pl
is_ordset/1	True if Term is an ordered set.
list_to_ord_set/2	Transform a list into an ordered set.
ord_add_element/3	Insert an element into the set.
ord_del_element/3	Delete an element from an ordered set.
ord_disjoint/2	True if Set1 and Set2 have no common elements.
ord_empty/1	True when List is the empty ordered set.
ord_intersect/2	True if both ordered sets have a non-empty intersection.
ord_intersect/3	Intersection holds the common elements of Set1 and Set2.
ord_intersection/2	Intersection of a powerset.
ord_intersection/3	Intersection holds the common elements of Set1 and Set2.
ord_intersection/4	Intersection and difference between two ordered sets.
ord_memberchk/2	True if Element is a member of OrdSet, compared using ==.
ord_selectchk/3	Selectchk/3, specialised for ordered sets.
ord_seteq/2	True if Set1 and Set2 have the same elements.
ord_subset/2	Is true if all elements of Sub are in Super.
ord_subtract/3	Diff is the set holding all elements of InOSet that are not in NotInOSet.
ord_symdiff/3	Is true when Difference is the symmetric difference of Set1 and Set2.
ord_union/2	True if Union is the union of all elements in the superset SetOfSets.
ord_union/3	Union is the union of Set1 and Set2.
ord_union/4	True iff ord_union(Set1, Set2, Union) and ord_subtract(Set2, Set1, New).
oset.pl  -- Ordered set manipulation
oset_addel/3	Ordered set element addition.
oset_delel/3	Ordered set element deletion.
oset_diff/3	Ordered set difference.
oset_dint/2	Distributed intersection.
oset_dunion/2	Distributed union.
oset_int/3	ordered set intersection.
oset_is/1	check that OSet in correct format (standard order).
oset_power/2	True when PSet is the powerset of Set.
oset_union/3	Union is the union of OSet1 and OSet2.
pairs.pl
group_pairs_by_key/2	Group values with equivalent (==/2) consecutive keys.
map_list_to_pairs/3	Create a Key-Value list by mapping each element of List.
pairs_keys/2	Remove the values from a list of Key-Value pairs.
pairs_keys_values/3	True if Keys holds the keys of Pairs and Values the values.
pairs_values/2	Remove the keys from a list of Key-Value pairs.
transpose_pairs/2	Swap Key-Value to Value-Key.
persistency.pl  -- Provide persistent dynamic predicates
pio.pl  -- Pure I/O
portray_text.pl  -- Portray text
portray_text/1	Switch portraying on or off.
set_portray_text/2	Set options for portraying.
set_portray_text/3	Set options for portraying.
pprint.pl  -- Pretty Print Prolog terms
print_term/2	Pretty print a Prolog term.
predicate_options.pl  -- Access and analyse predicate options
prolog_autoload.pl  -- Autoload all dependencies
autoload_all/0	Force all necessary autoloading to be done now.
autoload_all/1	Force all necessary autoloading to be done now.
prolog_breakpoints.pl  -- Manage Prolog break-points
breakpoint_property/2	True when Property is a property of the breakpoint Id.
delete_breakpoint/1	Delete breakpoint with given Id.
set_breakpoint/4	Put a breakpoint at the indicated source-location.
set_breakpoint/5	Put a breakpoint at the indicated source-location.
set_breakpoint_condition/2	Set a condition for of the breakpoint with given Id.
prolog_clause.pl  -- Get detailed source-information about a clause
clause_info/4	Fetches source information for the given clause.
clause_info/5	Fetches source information for the given clause.
clause_name/2	Provide a suitable description of the indicated clause.
initialization_layout/4	Find term-layout of :- initialization directives.
make_varnames/5	Create a Term varnames(...) where each argument contains the name of the variable at that offset.
open_source/2	Hook into clause_info/5 that opens the stream holding the source for a specific clause.
predicate_name/2	Describe a predicate as [Module:]Name/Arity.
unify_goal/5	This hook is called to fix up source code manipulations that result from goal expansions.
unify_term/2	Unify the two terms, where T2 is created by writing the term and reading it back in, but be aware that rounding problems may cause floating point numbers not to unify.
prolog_code.pl  -- Utilities for reasoning about code
prolog_codewalk.pl  -- Prolog code walker
prolog_program_clause/2	True when ClauseRef is a reference for clause in the program.
prolog_walk_code/1	Walk over all loaded (user) Prolog code.
subterm_pos/5	True when SubTerm is a sub term of Term, compared using Cmp, TermPosition describes the term layout of Term and SubTermPos describes the term layout of SubTerm.
prolog_colour.pl  -- Prolog syntax colouring support.
prolog_config.pl  -- Provide configuration information
prolog_config/2	Get information on the configuration of the current Prolog system.
prolog_dump_runtime_variables/0	Dump the current configuration in shell format.
prolog_coverage.pl  -- Coverage analysis tool
cov_load_data/2	Reload coverage data from File.
cov_property/1	True when coverage analysis satisfies Property.
cov_reset/0	Discard all collected coverage data.
cov_save_data/2	Save the coverage information to File.
coverage/1	As call(Goal), collecting coverage information while Goal is running.
coverage/2	Collect and optionally report coverage by Goal.
report_hook/2	This hook is called after the data collection.
show_coverage/1	Show collected coverage data.
prolog_debug.pl  -- User level debugging tools
debug_control_hook/1	Allow user-hooks in the Prolog debugger interaction.
debugging/0	Report current status of the debugger.
debugging_hook/1	Multifile hook that is called as forall(debugging_hook(DebugMode), true) and that may be used to extend the information printed from other debugging libraries.
exception_hook/5	Trap exceptions and consider whether or not to start the tracer.
nospy/1	Set/clear spy-points.
nospyall/0	Set/clear spy-points.
notrap/1	Install a trap on error(Formal, Context) exceptions that unify.
spy/1	Set/clear spy-points.
trap/1	Install a trap on error(Formal, Context) exceptions that unify.
trap_alias/2	Define short hands for commonly used exceptions.
prolog_deps.pl  -- Compute file dependencies
file_auto_import/2	Update the autoload/2 directives for File.
file_autoload_directives/3	Compute the dependencies as autoload/2 directives.
prolog_evaluable.pl  -- Inspect properties of evaluable functions
evaluable_property/2	True when Property is a property of the evaluable function Function.
prolog_format.pl
format_spec/2	Parse a format string.
format_spec/3	DCG for parsing format strings.
format_types/2	True when Format requires an argument list with terms of the type specified by Types.
prolog_history.pl  -- Per-directory persistent commandline history
prolog_history/1	Execute Action on the history.
prolog_jiti.pl  -- Just In Time Indexing (JITI) utilities
jiti_list/0	List the JITI (Just In Time Indexes) of selected predicates.
jiti_list/1	List the JITI (Just In Time Indexes) of selected predicates.
jiti_suggest_modes/0	Propose modes for the predicates referenced by Spec.
jiti_suggest_modes/1	Propose modes for the predicates referenced by Spec.
prolog_locale.pl  -- Tweak the locale for Prolog development
setup_prolog_integer_grouping/0	This sets up the Prolog toplevel and debugger to write numbers with grouping.
prolog_metainference.pl  -- Infer meta-predicate properties
infer_meta_predicate/2	True when MetaSpec is a meta-predicate specifier for the predicate Head.
inferred_meta_predicate/2	True when MetaSpec is an inferred meta-predicate specification for Head.
prolog_pack.pl
pack_info/1	Print more detailed information about Pack.
pack_install/1	Install one or more packs from SpecOrList.
pack_install/2	Install one or more packs from SpecOrList.
pack_install_local/3	Install a number of packages in a local directory.
pack_list/1	Query package server and installed packages and display results.
pack_list/2	Query package server and installed packages and display results.
pack_list_installed/0	List currently installed packages and report possible dependency issues.
pack_property/2	True when Property is a property of an installed Pack.
pack_publish/2	Publish a package.
pack_rebuild/0	Rebuild possible foreign components of Pack.
pack_rebuild/1	Rebuild possible foreign components of Pack.
pack_remove/1	Remove the indicated package.
pack_remove/2	Remove the indicated package.
pack_search/1	Query package server and installed packages and display results.
pack_upgrade/1	Upgrade Pack.
pack_url_file/2	True if File is a unique id for the referenced pack and version.
prolog_profile.pl  -- Execution profiler
profile/1	Run once(Goal) under the execution profiler.
profile/2	Run once(Goal) under the execution profiler.
profile_data/1	Gather all relevant data from profiler.
profile_procedure_data/2	Collect data for Pred.
show_profile/1	Display last collected profiling data.
prolog_qlfmake.pl  -- Compile the library to QLF format
qlf_make/0	Compile all files from the system libraries to .QLF format.
qlf_make/1	Ensure a .QLF version of Spec.
prolog_source.pl
quasi_quotation_syntax/2	True when the quasi quotation syntax Syntax can be loaded from Library.
xref_close_source/2	Called by prolog_close_source/1 to close a source previously opened by the hook prolog:xref_open_source/2.
xref_open_source/2	Hook to open an xref SourceID.
directory_source_files/3	True when Files is a sorted list of Prolog source files in Dir.
file_alias_path/2	True if file Alias points to Dir.
file_name_on_path/2	True if OnPath a description of File based on the file search path.
load_quasi_quotation_syntax/2	Import quasi quotation syntax Syntax from Path into the module specified by the first argument.
path_segments_atom/2	Translate between a path represented as a/b/c and an atom representing the same path.
prolog_canonical_source/2	Given a user-specification of a source, generate a unique and indexable identifier for it.
prolog_close_source/1	Close a stream opened using prolog_open_source/2.
prolog_file_directives/3	True when Directives is a list of directives that appear in the source file File.
prolog_open_source/2	Open source with given canonical id (see prolog_canonical_source/2) and remove the #!
prolog_read_source_term/4	Read a term from a Prolog source-file.
read_source_term_at_location/3	Try to read a Prolog term form an arbitrary location inside a file.
requires_library/2	known expansion hooks.
valid_term_position/2	Check that a Term has an appropriate TermPos layout.
prolog_stack.pl
backtrace/1	Get and print a stacktrace to the user_error stream.
get_prolog_backtrace/2	Obtain a backtrace from the current location.
get_prolog_backtrace/3	Obtain a backtrace from the current location.
print_last_choicepoint/0	Print details on the last open choice point.
print_last_choicepoint/2
print_prolog_backtrace/2	Print a stacktrace in human readable form to Stream.
print_prolog_backtrace/3	Print a stacktrace in human readable form to Stream.
prolog_stack_frame_property/2	True when Property is a property of Frame.
stack_guard/1	Dynamic multifile hook that is normally not defined.
stack_guard/1	Dynamic multifile predicate.
prolog_trace.pl  -- Print access to predicates
list_tracing/0	List predicates we are currently tracing.
notraceall/0	Remove all trace points.
trace/1	Print passes through ports of specified predicates.
trace/2	Print passes through ports of specified predicates.
tracing/2	True if Spec is traced using Ports.
prolog_versions.pl  -- Demand specific (Prolog) versions
prolog_wrap.pl
current_predicate_wrapper/4	True if Head is wrapped with Body.
unwrap_predicate/2	Remove the outermost wrapper whose name unifies with Name.
wrap_predicate/4	Wrap the predicate referenced by Head using Body.
prolog_xref.pl  -- Prolog cross-referencer data collection
pure_input.pl  -- Pure Input from files and streams
qpforeign.pl  -- Quintus compatible foreign loader
load_foreign_files/0	Calls make_foreign_wrapper_file(+File), compiles the wrapper and loads the predicates.
load_foreign_files/2	Calls make_foreign_wrapper_file(+File), compiles the wrapper and loads the predicates.
load_foreign_files/3	Calls make_foreign_wrapper_file(+File), compiles the wrapper and loads the predicates.
load_foreign_resource/2	Load a foreign module.
make_foreign_resource_wrapper/3	Create a wrapper-file for the given foreign resource.
make_foreign_wrapper_file/1	Just output the wrapper file to the named .c file.
make_foreign_wrapper_file/2	Just output the wrapper file to the named .c file.
make_shared_object/3	Generate a wrapper and link it using plld to the given SharedObject.
qsave.pl  -- Save current program as a state or executable
arch_shlib/3	This is a user defined hook called by qsave_program/2.
qsave_program/1	Make a saved state in file `File'.
qsave_program/2	Make a saved state in file `File'.
qsave_toplevel/0	Called to handle `-c file` compilaton.
quasi_quotations.pl  -- Define Quasi Quotation syntax
quintus.pl
abs/2	Unify `Absolute' with the absolute value of `Number'.
acos/2	Math library predicates.
asin/2	Math library predicates.
atan/2	Math library predicates.
atan2/3	Math library predicates.
atom_char/2	Same as ISO char_code/2.
ceiling/2	Math library predicates.
compile/1	Compile files.
cos/2	Math library predicates.
current_stream/3	SICStus/Quintus and backward compatible predicate.
date/1	Get current date as date(Y,M,D).
floor/2	Math library predicates.
genarg/3	Generalised version of ISO arg/3.
log/2	Math library predicates.
log10/2	Math library predicates.
midstring/3	Too difficult to explain.
midstring/4	Too difficult to explain.
midstring/5	Too difficult to explain.
midstring/6	Too difficult to explain.
no_style_check/1	Same as SWI-Prolog style_check(-Style).
on_exception/3
otherwise/0	For (A -> B ; otherwise -> C).
pow/3	Math library predicates.
prolog_flag/2	Same as ISO current_prolog_flag/2.
raise_exception/1	Quintus compatible exception handling.
round/2	Math library predicates.
sign/2	Math library predicates.
simple/1	Term is atomic or a variable.
sin/2	Math library predicates.
skip_line/0	Skip the rest of the current line (on Stream).
skip_line/1	Skip the rest of the current line (on Stream).
sqrt/2	Math library predicates.
stream_position/3	True when Old is the current position in Stream and the stream has been repositioned to New.
tan/2	Math library predicates.
unix/1	This predicate provides a partial emulation of the corresponding Quintus predicate.
random.pl
getrand/1	Query/set the state of the random generator.
maybe/0	Succeed/fail with equal probability (variant of maybe/1).
maybe/1	Succeed with probability P, fail with probability 1-P.
maybe/2	Succeed with probability K/N (variant of maybe/1).
random/1	Binds R to a new random float in the open interval (0.0,1.0).
random/3	Generate a random integer or float in a range.
random_between/3	Binds R to a random integer in [L,U] (i.e., including both L and U).
random_member/2	X is a random member of List.
random_numlist/4	Unify List with an ascending list of integers between L and U (inclusive).
random_perm2/4	Does X=A,Y=B or X=B,Y=A with equal probability.
random_permutation/2	Permutation is a random permutation of List.
random_select/3	Randomly select or insert an element.
random_subseq/3	Selects a random subsequence Subseq of List, with Complement containing all elements of List that were not selected.
randseq/3	S is a list of K unique random integers in the range 1..N.
randset/3	S is a sorted list of K unique random integers in the range 1..N.
setrand/1	Query/set the state of the random generator.
rbtrees.pl  -- Red black trees
readln.pl  -- Read line as list of tokens
readutil.pl  -- Read utilities
record.pl  -- Access compound arguments by name
rwlocks.pl  -- Read/write locks
with_rwlock/3	Run Goal, synchronized with LockId in ModeSpec.
with_rwlock/4	Run Goal, synchronized with LockId in ModeSpec.
sandbox.pl
sandbox_allowed_directive/1	Throws an exception if G is not considered a safe directive.
sandbox_allowed_expansion/1	Throws an exception if G is not considered a safe expansion goal.
sandbox_allowed_goal/1	Throw an exception if it is not safe to call G.
format_calls/3	Find ~@ calls from Format and Args.
safe_call/1	Call Goal if it complies with the sandboxing rules.
safe_directive/1	Hook to declare additional directives as safe.
safe_global_variable/1	Declare the given global variable safe to write to.
safe_goal/1	True if calling Goal provides no security risc.
safe_meta/2	Hook.
safe_primitive/1	True if Goal is safe to call (i.e., cannot access dangerous system-resources and cannot upset other parts of the Prolog process).
safe_prolog_flag/2	True if it is safe to set the flag Flag to Value.
settings.pl  -- Setting management
shell.pl
cd/0	Change working directory.
cd/1	Change working directory.
dirs/0	Manage the directory stack:.
ls/0	Listing similar to Unix =ls -F=, flagging directories with =/=.
ls/1	Listing similar to Unix =ls -F=, flagging directories with =/=.
mv/2	Move (Rename) a file.
popd/0	Manage the directory stack:.
pushd/0	Manage the directory stack:.
pushd/1	Manage the directory stack:.
pwd/0	Print current working directory.
rm/1	Remove (unlink) a file.
shell/0	Execute an interactive shell.
shlib.pl  -- Utility library for loading foreign objects (DLLs, shared objects)
solution_sequences.pl  -- Modify solution sequences
sort.pl
statistics.pl  -- Get information about resource usage
call_time/2	Call Goal as call/1, unifying Time with a dict that provides information on the resource usage.
call_time/3	Call Goal as call/1, unifying Time with a dict that provides information on the resource usage.
statistics/0	Print information about resource usage using print_message/2.
statistics/1	Stats is a dict representing the same information as statistics/0.
thread_statistics/2	Obtain statistical information about a single thread.
time/1	Execute Goal, reporting statistics to the user.
streams.pl  -- Manage Prolog streams
with_output_to/3	Run Goal and once/1 while capturing all output to all streams (current_output, user_output and user_error) in the string Output.
strings.pl  -- String utilities
dedent_lines/3	Remove shared indentation for all lines in a string.
indent_lines/3	Add Prefix to the beginning of lines in In.
indent_lines/4	Similar to indent_lines/3, but only adds Prefix to lines for which call(Filter, Line) succeeds.
interpolate_string/4	Establish a string from a template by replacing patterns.
string/4	Implements the quasi quotation syntax string.
string_lines/2	True when String represents Lines.
system.pl  -- System utilities
lock_predicate/1	Transform a predicate into a system predicate.
system_mode/1	Switch the system into system or user mode.
system_module/0	Any predicate defined after this declaraction uptil the end of the file will become a system predicate.
unlock_predicate/1	Transform a system predicate into a normal system predicate.
tables.pl  -- XSB interface to tables
terms.pl
foldsubterms/4	The predicate foldsubterms/5 calls call(Goal4, SubTerm1, SubTerm2, StateIn, StateOut) for each subterm, including variables, in Term1.
foldsubterms/5	The predicate foldsubterms/5 calls call(Goal4, SubTerm1, SubTerm2, StateIn, StateOut) for each subterm, including variables, in Term1.
mapargs/3	Term1 and Term2 have the same functor (name/arity) and for each matching pair of arguments call(Goal, A1, A2) is true.
mapsubterms/3	Recursively map sub terms of Term1 into subterms of Term2 for every pair for which call(Goal, ST1, ST2) succeeds.
mapsubterms_var/3	Recursively map sub terms of Term1 into subterms of Term2 for every pair for which call(Goal, ST1, ST2) succeeds.
same_functor/2	True when Term1 and Term2 are terms that have the same functor (Name/Arity).
same_functor/3	True when Term1 and Term2 are terms that have the same functor (Name/Arity).
same_functor/4	True when Term1 and Term2 are terms that have the same functor (Name/Arity).
subsumes/2	True if Generic is unified to Specific without changing Specific.
subsumes_chk/2	True if Generic can be made equivalent to Specific without changing Specific.
term_factorized/3	Is true when Skeleton is Term where all subterms that appear multiple times are replaced by a variable and Substitution is a list of Var=Value that provides the subterm at the location Var.
term_size/2	True if Size is the size in cells occupied by Term on the global (term) stack.
term_subsumer/3	General is the most specific term that is a generalisation of Special1 and Special2.
variant/2	Same as SWI-Prolog Term1 =@= Term2.
thread.pl  -- High level thread primitives
thread_pool.pl
create_pool/1	Hook to create a thread pool lazily.
current_thread_pool/1	True if Name refers to a defined thread pool.
thread_create_in_pool/4	Create a thread in Pool.
thread_pool_create/3	Create a pool of threads.
thread_pool_destroy/1	Destroy the thread pool named Name.
thread_pool_property/2	True if Property is a property of thread pool Name.
worker_exitted/3	It is possible that '__thread_pool_manager' no longer exists while closing down the process because the manager was killed before the worker.
threadutil.pl  -- Interactive thread utilities
attach_console/0	Create a new console and make the standard Prolog streams point to it.
attach_console/1	Create a new console and make the standard Prolog streams point to it.
interactor/0	Run a Prolog toplevel in another thread with a new console window.
interactor/1	Run a Prolog toplevel in another thread with a new console window.
join_threads/0	Join all terminated threads.
tbacktrace/1	Print a backtrace for Thread to the stream user_error of the calling thread.
tbacktrace/2	Print a backtrace for Thread to the stream user_error of the calling thread.
tdebug/0	Enable debug-mode, trapping the graphical debugger on reaching spy-points or errors.
tdebug/1	Enable debug-mode, trapping the graphical debugger on reaching spy-points or errors.
thread_has_console/0	True when the calling thread has an attached console.
thread_run_interactor/0	Attach a console and run a Prolog toplevel in the current thread.
threads/0	List currently known threads with their status.
tnodebug/0	Disable debug-mode in all threads or the specified Thread.
tnodebug/1	Disable debug-mode in all threads or the specified Thread.
tprofile/1	Profile the operation of Thread until the user hits a key.
tspy/1	Trap the graphical debugger on reaching Spec in the specified or any thread.
tspy/2	Trap the graphical debugger on reaching Spec in the specified or any thread.
with_stopped_threads/2	Stop all threads except the caller while running once(Goal).
xterm_args/1	Multifile and dynamic hook that provides (additional) arguments for the xterm(1) process opened for additional thread consoles.
tty.pl  -- Terminal operations
menu/3	Show a menu.
tty_clear/0	Clear the display.
tty_flash/0	Give visual signal if possible, otherwise beep.
ugraphs.pl
add_edges/3	Unify NewGraph with a new graph obtained by adding the list of Edges to Graph.
add_vertices/3	Unify NewGraph with a new graph obtained by adding the list of Vertices to Graph.
complement/2	UGraphOut is a ugraph with an edge between all vertices that are not connected in UGraphIn and all edges from UGraphIn removed.
compose/3	Compose NewGraph by connecting the drains of LeftGraph to the sources of RightGraph.
connect_ugraph/3	Adds Start as an additional vertex that is connected to all vertices in UGraphIn.
del_edges/3	Unify NewGraph with a new graph obtained by removing the list of Edges from Graph.
del_vertices/3	Unify NewGraph with a new graph obtained by deleting the list of Vertices and all the edges that start from or go to a vertex in Vertices to the Graph.
edges/2	Unify Edges with all edges appearing in Graph.
neighbors/3	Neigbours is a sorted list of the neighbours of Vertex in Graph.
neighbours/3	Neigbours is a sorted list of the neighbours of Vertex in Graph.
reachable/3	True when Vertices is an ordered set of vertices reachable in UGraph, including Vertex.
top_sort/2	Sort vertices topologically.
transitive_closure/2	Generate the graph Closure as the transitive closure of Graph.
transpose_ugraph/2	Unify NewGraph with a new graph obtained from Graph by replacing all edges of the form V1-V2 by edges of the form V2-V1.
ugraph_layers/2	Sort vertices topologically.
ugraph_union/3	NewGraph is the union of Graph1 and Graph2.
vertices/2	Unify Vertices with all vertices appearing in Graph.
vertices_edges_to_ugraph/3	Create a UGraph from Vertices and Edges.
url.pl  -- Analysing and constructing URL
utf8.pl  -- UTF-8 encoding/decoding on lists of character codes.
varnumbers.pl  -- Utilities for numbered terms
max_var_number/3	True when Max is the max of Start and the highest numbered $VAR(N) term.
numbervars/1	Number variables in Term using $VAR(N).
varnumbers/2	Inverse of numbervars/1.
varnumbers/3	Inverse of numbervars/3.
varnumbers_names/3	If Term is a term with numbered and named variables using the reserved term '$VAR'(X), Copy is a copy of Term where each '$VAR'(X) is consistently replaced by a fresh variable and Bindings is a list X = Var, relating the X terms with the variable it is mapped to.
vm.pl  -- SWI-Prolog Virtual Machine utilities
clause_vm/2	True when VM is the virtual machine code of ClauseRef.
vm_list/1	Lists the definition of the predicates matching Spec to current_output.
vmi_labels/2	Translated between a raw and a labeled representation for a VMI sequence as produced by clause_vm/2.
wfs.pl  -- Well Founded Semantics interface
answer_residual/2	True when Goal resolves to a tabled predicate and Residual is the residual goal associated with an answer for Goal.
call_delays/2	True when Goal is true with Delays.
call_residual_program/2	Call Goal and return the full residual program as a list of Clauses.
delays_residual_program/2	Given a delay as returned by call_delays/2, produce a set of clauses the represents the complete residual program responsible for these delays, The program contains at least one loop through tnot/1 and is either inconsistent or has multiple models according to the stable model semantics.
when.pl  -- Conditional coroutining
when/2	Execute Goal when Condition is satisfied.
win_menu.pl  -- Console window menu
writef.pl  -- Old-style formatted write
swritef/2	Use writef/1 or writef/2 and write the result to a string.
swritef/3	Use writef/1 or writef/2 and write the result to a string.
writef/1	Formatted write to the current_output.
writef/2	Formatted write to the current_output.
www_browser.pl  -- Open a URL in the users browser
yall.pl  -- Lambda expressions
zip.pl
with_zipper/2	Run Goal while holding ownership over Zipper.
zip_close/1	Close a zipper.
zip_close/2	Close a zipper.
zip_open/4	Create a Zipper, providing access to File.
zipper_file_info/3	Obtain information about the current zip entry.
zipper_goto/2	Seek Zipper to a specified entry.
zipper_members/2	True when Members is the list of file names in the Zipper.
zipper_open_current/3	Open the current entry as an input stream.