Did you know ... Search Documentation:
Pengines: Web Logic Programming Made Easy
Pengines: Web Logic Programming Made Easy
Torbjörn Lager
University of Gothenburg
Sweden
E-mail: lager@ling.gu.se
Jan Wielemaker
VU University Amsterdam
The Netherlands
E-mail: J.Wielemaker@vu.nl
Abstract
Pengines is short for Prolog Engines. The pengines package greatly simplifies (1) developing JavaScript based web-applications that must talk to a Prolog server and (2) realise distributed programming in Prolog by providing RPC (Remote Procedure Calling) over HTTP.

See also http://www.swi-prolog.org/pengines.

Table of Contents

1 An overview of Pengines
1.1 Pengine references
1.2 Pengine by examples
1.3 Making predicates available to clients
1.4 Mapping Prolog terms into JSON
1.5 Pengine settings
2 Pengine libraries
2.1 library(pengines): Pengines: Web Logic Programming Made Easy
2.2 library(term_to_json)

1 An overview of Pengines

This package provides a powerful high-level programming abstraction implemented on top of SWI-Prolog's thread predicates [1] and its HTTP client and server libraries [2]. The package makes it easy to create and query Prolog engines (or Pengines for short), over HTTP, from an ordinary Prolog thread, from a pengine, or from JavaScript running in a web client. Querying follows Prolog's default one-tuple-at-a-time generation of solutions. I/O is also supported.

Possible applications abound, but in particular three kinds of applications stick out: 1) The package provides us with a useful point of departure for the design and implementation of more advanced Prolog-based agent programming platforms, 2) it suggests an elegant and very straightforward approach to the building of a Semantic Web which is Prolog-based in a very radical sense, and, 3) it constitutes an ideal way to interface Prolog with JavaScript, the programming language most commonly available in web browsers.

A pengine is comprised of:

  • A Prolog thread
  • A dynamic clause database, private to the pengine, into which other processes may assert clauses. These clauses reside in the module pengine_sandbox.
  • A message queue for incoming requests
  • A message queue for outgoing responses

Everything needed to work with pengines is included in the package, including a JavaScript library for creating and interacting with pengines from a web client. However, the web server (in the file examples/server.pl) should only be regarded as a minimal example.

Underlying the design of the package is a careful analysis of the conversations taking place between Prolog and a user (which could be a human or another piece of software). Such conversations follow a communication protocol that we refer to as the Prolog Transport Protocol (PLTP). The protocol has been modelled by means of so called communicating finite-state machines [3]. A slight modification of the protocol -- referred to as PLTP(HTTP) -- enables us to synchronize it with HTTP. The diagram below depicts the communicating finite-state machines for PLTP(HTTP) and HTTP. Labels in bold indicate requests, and labels with a slash in front indicate responses.

The diagram below depicts a PLTP run (on the right) corresponding to a user's interaction with Prolog (on the left).‘1234' is the Pengine's identifier, which is a UUID in the actual implementation.

As for the relations between pengines, and for the time being, we have opted for a simple master-slave architecture. Once the master/slave relationships are established, the direction of control is always from the master to the slaves. One or more pengines can be orchestrated by a common master which can be an ordinary Prolog thread, another pengine, or a JavaScript process. A slave is always a pengine, running either locally or remotely with respect to its master. Subject to a setting, slaves are also dependent on their masters in the sense that if a master terminates, so do its slaves. (Note that in the source code we often use the term parent instead of master and child instead of slave. That is, we treat parent/child as synonymous to master/slave.)

The transport format is different depending on the nature of the master. If the master is a JavaScript process, it will (by default) formulate its requests using Prolog syntax, and get responses back as Prologs terms encoded in JSON. If the master is a Prolog process (a Prolog thread or a pengine) it will (again only by default) get responses back as Prolog terms.

Most of the pengine predicates are deterministic, yet they can control one or more pengines solving possibly non-deterministic queries. But the package also offers a number of non-deterministic predicates, built on top of the deterministic ones, that can solve queries "the Prolog way", binding query variables in the process, backtracking for more solutions. Of these predicates, pengine_rpc/3 is the most important. By means of pengine_rpc/3 a pengine running in a pengine server A can call and try to solve a query in the context of another pengine server B, taking advantage of the data being offered by B, just as if the data was local to A. Thus, in theory, a Prolog program, be it a pure Horn clause theory or not, can be as big as the Web. This is something that should make us think about a Semantic Web, especially when we consider the excellent fit between the Pengine library and SWI-Prolog's Semantic Web Library [4]. Adding Pengines functionality to the Cliopatria platform [5] is straightforward.

A note about safety: Because PLTP is layered on top of HTTP, it may utilize any standard HTTP security feature, such as HTTP authentication or SSL. Moreover, subject to a setting, the library uses safe_goal/1 [6], which determines whether it is safe for a slave pengine to try to solve queries asked by a master.

1.1 Pengine references

  1. http://www.swi-prolog.org/pldoc/man?section=threads
  2. http://www.swi-prolog.org/pldoc/package/http.html
  3. D. Brand and P. Zafiropulo. On communicating finite-state machines. Journal of the ACM, 30(2):323-342, 1983.
  4. http://www.swi-prolog.org/pldoc/package/semweb.html
  5. http://cliopatria.swi-prolog.org/home
  6. http://www.swi-prolog.org/pldoc/doc/home/vnc/prolog/lib/swipl/library/sandbox.pl

1.2 Pengine by examples

In this example we load the pengines library and use pengine_create/1 to create a slave pengine in a remote pengine server, and inject a number of clauses in it. We then use pengine_event_loop/2 to start an event loop that listens for three kinds of event terms. Running main/0 will write the terms q(a), q(b) and q(c) to standard output. Using pengine_ask/3 with the option template(X) would instead produce the output a, b and c. 

:- use_module(library(pengines)).

main :-
    pengine_create([
        server('https://pengines.swi-prolog.org'),
        src_text("
            q(X) :- p(X).
            p(a). p(b). p(c).
        ")
    ]),
    pengine_event_loop(handle, []).


handle(create(ID, _)) :-
    pengine_ask(ID, q(_X), []).
handle(success(_ID, [X], false)) :-
    writeln(X).
handle(success(ID, [X], true)) :-
    writeln(X),
    pengine_next(ID, []).

Here is another example, showing how to create and interact with a pengine from JavaScript in a way that seems ideal for Prolog programmers and JavaScript programmers alike. Loading the page brings up the browser's prompt dialog, waits for the user's input, and writes that input in the browser window. If the input was’stop', it stops there, else it repeats. Note that I/O works as expected. All we need to do is to use pengine_input/1 instead of read/1 and pengine_output/1 instead of write/1.

See Also: 

<html lang="en">
    <head>
        <title>Pengine Example</title>
    </head>
    <body>
            <h1>Pengine Example</h1>
        <div id="out"></div>

                <script src="https://ajax.googleapis.com/ajax/libs/jquery/2.0.3/jquery.min.js"></script>
        <script src="https://pengines.swi-prolog.org/pengine/pengines.js"></script>

        <script type="text/x-prolog">

            main :-
                repeat,
                pengine_input(X),
                pengine_output(X),
                X == stop.

        </script>
        <script>
            var pengine = new Pengine({
                oncreate: handleCreate,
                onprompt: handlePrompt,
                onoutput: handleOutput
            });
            function handleCreate() {
                pengine.ask('main');
            }
            function handlePrompt() {
                pengine.input(prompt(this.data));
            }
            function handleOutput() {
                $('#out').html(this.data);
            }
        </script>
    </body>
</html>

Our third example shows that a non-deterministic predicate can be called remotely by means of pengine_rpc/2, yet behave exactly as if called locally: 

?- use_module(library(pengines)).

?- member(X, [a, b, c, d]),
   pengine_rpc('https://pengines.swi-prolog.org', p(X), [
       src_list([p(b), p(c), p(d), p(e)])
   ]),
   member(X, [c, d, e, f]).
X = c ;
X = d.

?-

1.3 Making predicates available to clients

The code sent to a pengine is executed in the context of the module pengine_sandbox and the safety of goals is validated using safe_goal/1 prior to execution. Any pengine has access to the safe predicates defined in library(sandbox). If a server wishes to extend the set of predicates, it must:

  1. Define one or more modules that export the desired additional predicates.
  2. Makes this code available to the sandbox using the call below, assuming that the additional predicates are defined in the Prolog module file domain_predicates.pl 
    :- use_module(pengine_sandbox:domain_predicates).

  3. Register safe foreign predicates with library(sandbox), i.e., predicates that do not have side effects such as accessing the file system, load foreign extensions, define other predicates outside the sandbox environment, etc.

    Note that the safety of Prolog predicate can typically be proven by library(sandbox). This may not be the case if untracktable forms of meta-calling are used. In this case it is adviced to avoid such code. If this is not possible, the code must be carefully reviewed by hand and of proven to be safe it may be registered with the sandbox library.

For example, basic RDF access can be granted to pengines using the code below. Please study the sandboxing code carefully before adding declarations. 

:- use_module(pengine_sandbox:library(semweb/rdf_db)).
:- use_module(library(sandbox)).

:- multifile sandbox:safe_primitive/1.

sandbox:safe_primitive(rdf_db:rdf(_,_,_)).

1.4 Mapping Prolog terms into JSON

In Prolog, solutions to queries are given as bindings which map variable names into Prolog terms. A programmer using Pengines in a JavaScript evironment needs to understand how bindings are converted into JSON. For example, the programmer needs to understand that the second solution to append(Xs, Ys, [a,b,c]) is given by the bindings ['Xs'=[a],'Ys'=[b,c]] and that these binding can be represented in JSON as {"Xs":["a"], "Ys":["b","c"]}.

Pengines defines the following mapping between ground Prolog terms and JSON.

  • A Prolog atom is mapped to a JSON string.
  • A Prolog number is mapped to a JSON number.
  • A Prolog list is mapped to a JSON array.
  • The Prolog terms @(true) and @(false) are mapped to the JSON constants true and false, respectively.
  • The Prolog term @(null) is mapped to the JSON constant null.
  • A Prolog term json(NameValueList), where NameValueList is a list of Name=Value pairs, is mapped to a JSON object.
  • Any other complex Prolog term T is mapped to a JSON object of the form {"functor": F, "args": A} where F is a string representing the functor of T and A is the list of JSON values representing Ts arguments.

1.5 Pengine settings

Settings currently recognized by the Pengines library:

Name Type Default Description
max_session_penginesinteger1Maximum number of pengines a client can create. -1 is infinite
time_limitnumber60Maximum time between output (in seconds)
allow_fromlist(atom) [*]Specify allowed IP addresses
deny_fromlist(atom) [] Specify denied IP addresses. Applied after allow_from.

2 Pengine libraries

2.1 library(pengines): Pengines: Web Logic Programming Made Easy

author
Torbjörn Lager and Jan Wielemaker

The library(pengines) provides an infrastructure for creating Prolog engines in a (remote) pengine server and accessing these engines either from Prolog or JavaScript.

[det]pengine_create(:Options)
Creates a new pengine. Valid options are:
id(-ID)
ID gets instantiated to the id of the created pengine. ID is atomic.
alias(+Name)
The pengine is named Name (an atom). A slave pengine (child) can subsequently be referred to by this name.
application(+Application)
Application in which the pengine runs. See pengine_application/1.
server(+URL)
The pengine will run in (and in the Prolog context of) the pengine server located at URL.
src_list(+List_of_clauses)
Inject a list of Prolog clauses into the pengine.
src_text(+Atom_or_string)
Inject the clauses specified by a source text into the pengine.
src_url(+URL)
Inject the clauses specified in the file located at URL into the pengine.
src_predicates(+List)
Send the local predicates denoted by List to the remote pengine. List is a list of predicate indicators.

Remaining options are passed to http_open/3 (meaningful only for non-local pengines) and thread_create/3. Note that for thread_create/3 only options changing the stack-sizes can be used. In particular, do not pass the detached or alias options..

Successful creation of a pengine will return an event term of the following form:

create(ID, Term)
ID is the id of the pengine that was created. Term is not used at the moment.

An error will be returned if the pengine could not be created:

error(ID, Term)
ID is invalid, since no pengine was created. Term is the exception's error term.
[det]pengine_ask(+NameOrID, @Query, +Options)
Asks pengine NameOrID a query Query.

Options is a list of options:

template(+Template)
Template is a variable (or a term containing variables) shared with the query. By default, the template is identical to the query.
chunk(+IntegerOrFalse)
Retrieve solutions in chunks of Integer rather than one by one. 1 means no chunking (default). Other integers indicate the maximum number of solutions to retrieve in one chunk. If false, the Pengine goal is not executed using findall/3 and friends and we do not backtrack immediately over the goal. As a result, changes to backtrackable global state are retained. This is similar that using set_prolog_flag(toplevel_mode, recursive).
bindings(+Bindings)
Sets the global variable’$variable_names' to a list of Name = Var terms, providing access to the actual variable names.

Any remaining options are passed to pengine_send/3.

Note that the predicate pengine_ask/3 is deterministic, even for queries that have more than one solution. Also, the variables in Query will not be bound. Instead, results will be returned in the form of event terms.

success(ID, Terms, Projection, Time, More)
ID is the id of the pengine that succeeded in solving the query. Terms is a list holding instantiations of Template. Projection is a list of variable names that should be displayed. Time is the CPU time used to produce the results and finally, More is either true or false, indicating whether we can expect the pengine to be able to return more solutions or not, would we call pengine_next/2.
failure(ID)
ID is the id of the pengine that failed for lack of a solutions.
error(ID, Term)
ID is the id of the pengine throwing the exception. Term is the exception's error term.
output(ID, Term)
ID is the id of a pengine running the query that called pengine_output/1. Term is the term that was passed in the first argument of pengine_output/1 when it was called.
prompt(ID, Term)
ID is the id of the pengine that called pengine_input/2 and Term is the prompt.

Defined in terms of pengine_send/3, like so: 

pengine_ask(ID, Query, Options) :-
    partition(pengine_ask_option, Options, AskOptions, SendOptions),
    pengine_send(ID, ask(Query, AskOptions), SendOptions).
[det]pengine_next(+NameOrID, +Options)
Asks pengine NameOrID for the next solution to a query started by pengine_ask/3. Defined options are:
chunk(+Count)
Modify the chunk-size to Count before asking the next set of solutions. This may not be used if the goal was started with chunk(false).

Remaining options are passed to pengine_send/3. The result of re-executing the current goal is returned to the caller's message queue in the form of event terms.

success(ID, Terms, Projection, Time, More)
See pengine_ask/3.
failure(ID)
ID is the id of the pengine that failed for lack of more solutions.
error(ID, Term)
ID is the id of the pengine throwing the exception. Term is the exception's error term.
output(ID, Term)
ID is the id of a pengine running the query that called pengine_output/1. Term is the term that was passed in the first argument of pengine_output/1 when it was called.
prompt(ID, Term)
ID is the id of the pengine that called pengine_input/2 and Term is the prompt.

Defined in terms of pengine_send/3, as follows: 

pengine_next(ID, Options) :-
    pengine_send(ID, next, Options).
[det]pengine_stop(+NameOrID, +Options)
Tells pengine NameOrID to stop looking for more solutions to a query started by pengine_ask/3. Options are passed to pengine_send/3.

Defined in terms of pengine_send/3, like so: 

pengine_stop(ID, Options) :-
    pengine_send(ID, stop, Options).
[det]pengine_abort(+NameOrID)
Aborts the running query. The pengine goes back to state‘2', waiting for new queries.
See also
pengine_destroy/1.
[det]pengine_destroy(+NameOrID)
[det]pengine_destroy(+NameOrID, +Options)
Destroys the pengine NameOrID. With the option force(true), the pengine is killed using abort/0 and pengine_destroy/2 succeeds.
[det]pengine_self(-Id)
True if the current thread is a pengine with Id.
[det]pengine_application(+Application)
Directive that must be used to declare a pengine application module. The module must not be associated to any file. The default application is pengine_sandbox. The example below creates a new application address_book and imports the API defined in the module file adress_book_api.pl into the application. 
:- pengine_application(address_book).
:- use_module(address_book:adress_book_api).
[nondet]current_pengine_application(?Application)
True when Application is a currently defined application.
See also
pengine_application/1
[nondet]pengine_property(?Pengine, ?Property)
True when Property is a property of the given Pengine. Enumerates all pengines that are known to the calling Prolog process. Defined properties are:
self(ID)
Identifier of the pengine. This is the same as the first argument, and can be used to enumerate all known pengines.
alias(Name)
Name is the alias name of the pengine, as provided through the alias option when creating the pengine.
thread(Thread)
If the pengine is a local pengine, Thread is the Prolog thread identifier of the pengine.
remote(Server)
If the pengine is remote, the URL of the server.
application(Application)
Pengine runs the given application
module(Module)
Temporary module used for running the Pengine.
destroy(Destroy)
Destroy is true if the pengines is destroyed automatically after completing the query.
parent(Queue)
Message queue to which the (local) pengine reports.
source(?SourceID, ?Source)
Source is the source code with the given SourceID. May be present if the setting debug_info is present.
detached(?Time)
Pengine was detached at Time.
[det]pengine_output(+Term)
Sends Term to the parent pengine or thread.
[det]pengine_debug(+Format, +Args)
Create a message using format/3 from Format and Args and send this to the client. The default JavaScript client will call console.log(Message) if there is a console. The predicate pengine_rpc/3 calls debug(pengine(debug), '~w', [Message]). The debug topic pengine(debug) is enabled by default.
See also
- debug/1 and nodebug/1 for controlling the pengine(debug) topic
- format/2 for format specifications
[det,multifile]thread_pool:create_pool(+Application)
On demand creation of a thread pool for a pengine application.
[det]pengine_done
Called from the pengine thread at_exit option. Destroys child pengines using pengine_destroy/1. Cleaning up the Pengine is synchronised by the pengine_done mutex. See read_event/6.
[semidet,multifile]prepare_module(+Module, +Application, +Options)
Hook, called to initialize the temporary private module that provides the working context of a pengine. This hook is executed by the pengine's thread. Preparing the source consists of three steps:

  1. Add Application as (first) default import module for Module
  2. Call this hook
  3. Compile the source provided by the the src_text and src_url options
Module is a new temporary module (see in_temporary_module/3) that may be (further) prepared by this hook.
Application (also a module) associated to the pengine.
Options is passed from the environment and should (currently) be ignored.
[semidet,multifile]prepare_goal(+Goal0, -Goal1, +Options)
Pre-preparation hook for running Goal0. The hook runs in the context of the pengine. Goal is the raw goal given to ask. The returned Goal1 is subject to goal expansion (expand_goal/2) and sandbox validation (safe_goal/1) prior to execution. If this goal fails, Goal0 is used for further processing.
Options provides the options as given to ask
[semidet,multifile]not_sandboxed(+User, +Application)
This hook is called to see whether the Pengine must be executed in a protected environment. It is only called after authentication_hook/3 has confirmed the authentity of the current user. If this hook succeeds, both loading the code and executing the query is executed without enforcing sandbox security. Typically, one should:

  1. Provide a safe user authentication hook.
  2. Enable HTTPS in the server or put it behind an HTTPS proxy and ensure that the network between the proxy and the pengine server can be trusted.
[det]pengine_pull_response(+Pengine, +Options)
Pulls a response (an event term) from the slave Pengine if Pengine is a remote process, else does nothing at all.
[det]pengine_input(+Prompt, -Term)
Sends Prompt to the master (parent) pengine and waits for input. Note that Prompt may be any term, compound as well as atomic.
[det]pengine_respond(+Pengine, +Input, +Options)
Sends a response in the form of the term Input to a slave (child) pengine that has prompted its master (parent) for input.

Defined in terms of pengine_send/3, as follows: 

pengine_respond(Pengine, Input, Options) :-
    pengine_send(Pengine, input(Input), Options).
[det]pengine_event_loop(:Closure, +Options)
Starts an event loop accepting event terms sent to the current pengine or thread. For each such event E, calls ignore(call(Closure, E)). A closure thus acts as a handler for the event. Some events are also treated specially:
create(ID, Term)
The ID is placed in a list of active pengines.
destroy(ID)
The ID is removed from the list of active pengines. When the last pengine ID is removed, the loop terminates.
output(ID, Term)
The predicate pengine_pull_response/2 is called.

Valid options are:

autoforward(+To)
Forwards received event terms to slaves. To is either all, all_but_sender or a Prolog list of NameOrIDs. [not yet implemented]
[nondet]pengine_rpc(+URL, +Query)
[nondet]pengine_rpc(+URL, +Query, +Options)
Semantically equivalent to the sequence below, except that the query is executed in (and in the Prolog context of) the pengine server referred to by URL, rather than locally. 
  copy_term_nat(Query, Copy),  % attributes are not copied to the server
  call(Copy),			 % executed on server at URL
  Query = Copy.

Valid options are:

chunk(+IntegerOrFalse)
Can be used to reduce the number of network roundtrips being made. See pengine_ask/3.
timeout(+Time)
Wait at most Time seconds for the next event from the server. The default is defined by the setting pengines:time_limit.

Remaining options (except the server option) are passed to pengine_create/1.

[semidet,multifile]prompt(+ID, +Prompt, -Term)
Hook to handle pengine_input/2 from the remote pengine. If the hooks fails, pengine_rpc/3 calls read/1 using the current prompt.
[semidet,multifile]output(+ID, +Term)
Hook to handle pengine_output/1 from the remote pengine. If the hook fails, it calls print/1 on Term.
[det]portray_blob(+Blob, +Options)
Portray non-text blobs that may appear in output terms. Not really sure about that. Basically such terms need to be avoided as they are meaningless outside the process. The generated error is hard to debug though, so now we send them as '$BLOB'(Type). Future versions may include more info, depending on Type.
[semidet,multifile]write_result(+Lang, +Event, +Dict)
Hook that allows for different output formats. The core Pengines library supports prolog and various JSON dialects. The hook event_to_json/3 can be used to refine the JSON dialects. This hook must be used if a completely different output format is desired.
add_error_details(+Error, +JSON0, -JSON)
Add format error code and location information to an error. Also used by pengines_io.pl.
[semidet,multifile]event_to_json(+Event, -JSONTerm, +Lang)
Hook that translates a Pengine event structure into a term suitable for reply_json/1, according to the language specification Lang. This can be used to massage general Prolog terms, notably associated with success(ID, Bindings, Projection, Time, More) and output(ID, Term) into a format suitable for processing at the client side.
[semidet,multifile]authentication_hook(+Request, +Application, -User)
This hook is called from the =/pengine/create= HTTP handler to discover whether the server is accessed by an authorized user. It can react in three ways:

  • Succeed, binding User to a ground term. The authentity of the user is available through pengine_user/1.
  • Fail. The =/create= succeeds, but the pengine is not associated with a user.
  • Throw an exception to prevent creation of the pengine. Two meaningful exceptions are:

    • throw(http_reply(authorise(basic(Realm)))) Start a normal HTTP login challenge (reply 401)
    • throw(http_reply(forbidden(Path)))) Reject the request using a 403 repply.
See also
http_authenticate/3 can be used to implement this hook using default HTTP authentication data.
[semidet]pengine_user(-User)
True when the pengine was create by an HTTP request that authorized User.
See also
authentication_hook/3 can be used to extract authorization from the HTTP header.
[det]pengine_event(?EventTerm)
[det]pengine_event(?EventTerm, +Options)
Examines the pengine's event queue and if necessary blocks execution until a term that unifies to Term arrives in the queue. After a term from the queue has been unified to Term, the term is deleted from the queue.

Valid options are:

timeout(+Time)
Time is a float or integer and specifies the maximum time to wait in seconds. If no event has arrived before the time is up EventTerm is bound to the atom timeout.
listen(+Id)
Only listen to events from the pengine identified by Id.

2.2 library(term_to_json)

[det]term_to_json(+Term, +Bindings, -JsonTerm)
[det]term_to_json(+Term, -JsonTerm)
Convert any general Prolog term into a JSON term. Prolog lists are treated in a special way. Also, JSON terms are not converted. Mapping:

  • Variable: {"type":"var", "name":<string>}
  • Atom: {"type":"atom", "value":<string>}
  • Integer: {"type":"integer", "value":<integer>}
  • Float: {"type":"float", "value":<float>}
  • List: JSON array
  • Dict: a JSON object. Values are processed recursively. (the tag is ignored)
  • json([Key=Value, ...]): a JSON object Values are processed recursively.
  • compound: {"type":"compound", "functor":<string>, "args":<array>}
Bindings is a list of Name=Var terms for variables that get their name from the environment.

Index

?
add_error_details/3
authentication_hook/3
current_pengine_application/1
event_to_json/3
not_sandboxed/2
output/2
pengine_abort/1
pengine_application/1
pengine_ask/3
pengine_create/1
pengine_debug/2
pengine_destroy/1
pengine_destroy/2
pengine_done/0
pengine_event/1
pengine_event/2
pengine_event_loop/2
pengine_input/2
pengine_next/2
pengine_output/1
pengine_property/2
pengine_pull_response/2
pengine_respond/3
pengine_rpc/2
pengine_rpc/3
pengine_self/1
pengine_stop/2
pengine_user/1
portray_blob/2
prepare_goal/3
prepare_module/3
prompt/3
term_to_json/2
term_to_json/3
thread_pool:create_pool/1
write_result/3
Tags are associated to your profile if you are logged in|Report abuse
Tags:
  • webengines
LogicalCaptain said (2021-04-26T05:21:16):0 upvotes 0 0 downvotes
Picture of user LogicalCaptain.

A modifiable version of the "PLTP state diagram"

Can be found here

The paper on "Communicating Finite-State Machines" is

Modeling a communication protocol between two (or more) processes is done by specifying a finite-state machine for each process, where an edge is traversed either "actively", sending a message to the other process or "passively" upon receipt of a message (via one or possibly more channels). Transitions are done alternatingly on both sides.

See:

The diagram as shown multiplies-out the state machines for the server and client into a single "protocol state machine". This is called a Channel System or Global State Transition Diagram.

See:

Notes:

  • This is an "alternating state machine": A BOLD transition is always followed by a SLASH transition and vice-versa.
  • Pengine processing or idling is done while the machine is in one of the states.
  • Better labels for the states might be:
    • 0 = pengine_inexistent
    • 1 = pengine_creating or pengine_destroying
    • 2 = pengine_idling
    • 3 = pengine_running
    • 4 = pengine_outputting, waiting for client to pull text
    • 5 = pengine_prompting, waiting for client to push text
    • 6 = pengine_waiting_for_cmd
    • 7 = pengine_stopping
  • All the messages/events shown are synchronous but there are also asynchronous messages like "abort" to kick the pengine out of state 3 - so this diagram is missing a few elements.
  • AFAIK, this machine is independent of the HTTP session state: You can close the HTTP session, and reconnect later using a previously obtained Pengine Id. But are messages in the queue delivered at that point? We need to test!
  • Missing is the timeout event which tears down a Pengine after 3 minutes of idling.
  • All the messages are HTTP messages, which may have their own internal chunking for large data blocks. (What happens if there is an error in the HTTP protocol?)
  • Websockets or HTTP/2 woule be more flexible for such a back-and-forth than HTTP/1.1. And maybe even XMPP (but you cannot readily drive these from a web browser).

Example: Setting up local pengines

Here we create local engines (but they are not cleaned up properly, once 3 have been created, no more can be created even though the 3 exited after reaching their "idle timeout").

Jan recommends to not use pengines locally. Use engines instead:

Local pengines have been out of fashion for a while. In most cases where you might want to use them engines are probably a way more efficient choice. These didn’t exist when Pengines were invented … 
:- use_module(library(pengines)).
:- use_module(library(settings)).

attempt :-
   set_setting(pengine_sandbox:idle_limit, 3), % default is 5 mins, shorten to 3s
   setting(pengine_sandbox:slave_limit,Max),
   format("One can create ~d server/slave pengines~n",Max),
   length(PengineIds,Max),
   maplist(
      [PengineId]>>pengine_create(
                         [
                         id(PengineId)
                         ]),
      PengineIds
   ),
   maplist(
      [PengineId]>>format("Created Pengine: ~q~n",PengineId),
      PengineIds),
   format("Current threads~n",[]),
   forall(
      thread_property(ThreadId,id(NumThreadId)),
      format("   ~q ~q~n",[ThreadId,NumThreadId])),
   aggregate_all(count, pengines:child(_,_), CountBefore),
   format("There are ~d pengines~n",CountBefore),
   sleep(5),
   % It would be better to join the threads here.
   % There will be 3 x "Adios" on the screen.
   aggregate_all(count, pengines:child(_,_), CountAfter),
   format("There are ~d pengines~n",CountAfter),

   % But now it's no longer possible to start another pengine...

   \+ pengine_create(./lib/swipl/library/http/web/js/pengines.js
                      [
                      id(PengineId),
                      at_exit(format('Adios!~n',[]))
                      ]).

Example code in the SWI-Prolog distribution

We find the following:

The javascript library providong function to invoke a pengine on a remote HTTP server from a browser is in $SWIPL_HOME/lib/swipl/library/http/web/js/pengines.js. It is pulled in by the example .html pages.

The default options in that file are:

Pengine.options = {
  format: "json",
  server: "/pengine"   // i.e. query the same server as the one serving the page
};

Under

  • $SWIPL_HOME/lib/swipl/doc/packages/examples/pengines/ where $SWIPL_HOME is the home of installed SWI-Prolog
  • or
  • $SWIPL_DISTRO/packages/pengines/examples/ where $SWIPL_DISTRO is the location of the to-be-compiled SWI-Prolog distribution

we find:

|
├── client.pl   - Simple client-side demo code
├── server.pl   - Server-side demo code
└── web         - Various web pages to demonstrate access-from-browser
    ├── index.html         - List them all
    ├── simple.html        - Simple demo running a Prolog query
    ├── chunking.html      - As above using paginated results
    ├── input_output.html  - Run a dialogue with I/O
    ├── queens.html        - The famous 8 queens (on the web!)
    ├── debugging.html     - Debugging
    ├── hack.html          - You can't run just *any* Prolog goal
    ├── pengine.html       - Pengine (doesn't work with sleep/1!!)
    ├── queen.png
    └── update-jquery

Examine server.pl

The code of server.pl which actually starts a pengine server

:- module(pengine_server,
          [ server/1                    % +Port
          ]).
:- use_module(library(http/thread_httpd)).
:- use_module(library(http/http_dispatch)).
:- use_module(library(http/http_server_files)).
:- use_module(library(http/http_files)).
:- use_module(library(pengines)).
:- use_module(pengine_sandbox:library(pengines)).

:- http_handler(/, http_reply_from_files(web, []), [prefix]).

server(Port) :-
    http_server(http_dispatch, [port(Port)]).
  • There is a directive that calls http_handler/3, registering the handler http_reply_from_files/3 with the origin-of-files directory set to web, and this for any request start with /, i.e. for any and all requests.
    • I'm not sure how the relative path web is resolved, I had to replace it with an absolute path to the web directory. Otherwise the "internal server error" is given as response, which is just indication that a predicate is failing, in this case, an indication that the requested file cannot be found or accessed (a bit hard to judge, more logging and more fine-grained error reporting would be needed).
    • In any case, given the Path of an URL, the web server will try to serve a file web/Path, i.e. any of the .html files in the distribution.
    • It rejects requests for things like ../../../etc/passwd, which is perfect.
  • Predicate server(Port) just calls http_server/2, the web-server predicate, with the the standard http_dispatch/1 from library(http_dispatch) and the TCP/IP port to use as arguments.
  • When server(Port) is called, any HTTP request will be handed to http_reply_from_files/3 as previously registered. We now are running a web file server!

But where do the Pengines come into the picture?

It turns out that if you load library(pengines), the following HTTP handlers are declared via directives:

:- http_handler(root(pengine), http_404([]), [ id(pengines) ]).
:- http_handler(root(pengine/create), http_pengine_create, [ time_limit(infinite), spawn([]) ]).
:- http_handler(root(pengine/send), http_pengine_send, [ time_limit(infinite), spawn([]) ]).
:- http_handler(root(pengine/pull_response), http_pengine_pull_response, [ time_limit(infinite), spawn([]) ]).
:- http_handler(root(pengine/abort), http_pengine_abort, []).
:- http_handler(root(pengine/detach), http_pengine_detach, []).
:- http_handler(root(pengine/list), http_pengine_list, []).
:- http_handler(root(pengine/ping), http_pengine_ping, []).
:- http_handler(root(pengine/destroy_all), http_pengine_destroy_all, []).
:- http_handler(root(pengine/'pengines.js'), http_reply_file(library('http/web/js/pengines.js'), []), []).
:- http_handler(root(pengine/'plterm.css'), http_reply_file(library('http/web/css/plterm.css'), []), []).

So an infrastructure for handling pengine requests appears underneath URL /pengine and is available to http_server/2 under the above URLs. You are immediately good to go.

Running a pengine server and listing its pengines

Suppose you have the above server.pl at hand, with web replaced by the appropriate path.

Then:

?- [server].
true.

?- server(10001).
% Started server at http://localhost:10001/
true.

Now access http://localhost:10001/chunking.html with your web browser and kick off pengine processing several times in different tabs.

You can list the running pengines with this code inspired by pengines.pl:

- use_module(library(pengines)).

% Resulting dict:
%
% pengine{
%    self:Id,                   % Identifier of the pengine. This is the same as the first argument.
%    module:Id,                 % Temporary module used for running the Pengine (always bound to the same value of the Identifier).
%    parent:Parent,             % Message queue to which the (local) pengine reports (what if it's not local?)
%    application:Application,   % Pengine runs the given application (module-without-source-name).
%    destroy:Destroy,           % Destroy is =true= if the pengine is destroyed automatically after completing the query.
% }
%
% The following are added depending on circumstances:
%
%    alias:Alias,                    % Name is the alias name of the pengine, as provided through the `alias` option when creating the pengine.
%    remote:IsRemote                 % One of true, false to indicate whether this is a remote or a local pengine
%    url:ServerUrl                   % URL of the remote server if this is a remote pengine
%    thread:Thread                   % Thread number of pengine (different from 0) if this is a local pengine
%    source:source(SourceID,Source)  % Source is the source code with the given SourceID. May be present if the setting `debug_info` is present.
%    detached:When                   % Time when the Pengine was detached.

collect_one(Id,DictOut) :-
   Dict = pengine{ self:Id, module:Id, parent:Parent, application:Application, destroy:Destroy },
   pengines:current_pengine(Id,_,_,_,_,_),                                     % Backtrackably enumerate Id (to make sure Id does not change on the 2nd call to current_pengine/6)
   format("Checking  out pengine ~q~n",[Id]),
   pengines:current_pengine(Id,Parent,Thread,ServerUrl,Application,Destroy),   % Get more info about Pengine Id (this should succeed in any case)
   maybe_add_detached(Id,Dict,Dict1),
   maybe_add_alias(Id,Dict1,Dict2),
   maybe_add_remote(Thread,ServerUrl,Dict2,Dict3),
   maybe_add_source(Id,Dict3,DictOut).

maybe_add_detached(Id,DictIn,DictOut) :-
   pengines:pengine_detached(Id, When)
   -> put_dict(_{detached:When},DictIn,DictOut)
   ;  DictIn = DictOut.

maybe_add_alias(Id,DictIn,DictOut) :-
   (pengines:child(Alias,Id),Alias\==Id)
   -> put_dict(_{alias:Alias},DictIn,DictOut)
   ;  DictIn = DictOut.
    
maybe_add_remote(Thread,ServerUrl,DictIn,DictOut) :-
   Thread == 0
   -> put_dict(_{remote:true,url:ServerUrl},DictIn,DictOut)
   ;  put_dict(_{remote:false,thread:Thread},DictIn,DictOut).

maybe_add_source(Id,DictIn,DictOut) :-
   pengines:pengine_data(Id, source(SourceID, Source))
   -> put_dict(_{source:source(SourceID,Source)},DictIn,DictOut)
   ;  DictIn = DictOut.

% Collection information on all pengines

collect_all(DictOut) :-
   bagof(Id-DictEngine,collect_one(Id,DictEngine),BaggedPairs),
   dict_pairs(DictOut,pengines,BaggedPairs).

In combination with a dict prettyprinter (which I still have to properly put into a package), you then get results like:

?- collect_all(D),dict_pp(D,_{border:true}).
Checking  out pengine '17892012-ee6a-48cd-9a1a-f2570e9f8891'
Checking  out pengine 'ffb1e780-a85b-47cc-be09-19970f024b53'
Checking  out pengine 'b4b74d91-8492-4a22-a0af-903a83f6f658'
+-------------------------------------------------------------------------------------------+
|                                         pengines                                          |
+-------------------------------------------------------------------------------------------+
|17892012-ee6a-48cd-9a1a-f2570e9f8891 : +--------------------------------------------------+|
|                                       |                     pengine                      ||
|                                       +--------------------------------------------------+|
|                                       |application : pengine_sandbox                     ||
|                                       |destroy     : true                                ||
|                                       |module      : 17892012-ee6a-48cd-9a1a-f2570e9f8891||
|                                       |parent      : <message_queue>(0x7f44540054e0)     ||
|                                       |remote      : false                               ||
|                                       |self        : 17892012-ee6a-48cd-9a1a-f2570e9f8891||
|                                       |thread      : <thread>(11,0x7f445c0167a0)         ||
|                                       +--------------------------------------------------+|
|b4b74d91-8492-4a22-a0af-903a83f6f658 : +--------------------------------------------------+|
|                                       |                     pengine                      ||
|                                       +--------------------------------------------------+|
|                                       |application : pengine_sandbox                     ||
|                                       |destroy     : true                                ||
|                                       |module      : b4b74d91-8492-4a22-a0af-903a83f6f658||
|                                       |parent      : <message_queue>(0x7f4454006a30)     ||
|                                       |remote      : false                               ||
|                                       |self        : b4b74d91-8492-4a22-a0af-903a83f6f658||
|                                       |thread      : <thread>(13,0x7f445c01d8f0)         ||
|                                       +--------------------------------------------------+|
|ffb1e780-a85b-47cc-be09-19970f024b53 : +--------------------------------------------------+|
|                                       |                     pengine                      ||
|                                       +--------------------------------------------------+|
|                                       |application : pengine_sandbox                     ||
|                                       |destroy     : true                                ||
|                                       |module      : ffb1e780-a85b-47cc-be09-19970f024b53||
|                                       |parent      : <message_queue>(0x7f4454003700)     ||
|                                       |remote      : false                               ||
|                                       |self        : ffb1e780-a85b-47cc-be09-19970f024b53||
|                                       |thread      : <thread>(9,0x7f445c01b9e0)          ||
|                                       +--------------------------------------------------+|
+-------------------------------------------------------------------------------------------+